Mapping a CDM Printer on Mac

Please, ensure you are connected to the DePaul Network via Wi-Fi or Ethernet before attempting the steps below.

1. Select the Apple logo in the top-left corner, then select System Settings.

  

From the list on the left-hand side, scroll down and select Printers & Scanners.

  

2. Select Add Printer, Scanner, or Fax...

  

3. From the icons near the top of the window, right-click anywhere in the empty space next to them. From the menu that appears, select Customize Toolbar... as shown below:

   

4. Click and drag the Advanced icon as shown circled below, and move it to the empty space indicated. Click Done:

  

5. Click on the Advanced icon. The window will take a bit of time to load. After it finishes loading, you should see a dialogue box pictured below. Pick the following options as shown:

• Type: Select “Windows printer via spoolss”
• URL: Type the name of the printer server (cdmpsprd01.dpu.depaul.edu) followed by the name of the printer. The printer name can be found physically labeled on the printer. This example uses the fac5-bw printer (CDM 5^th floor faculty B/W printer)
• Name: The name will default to cdmpsprd01.dpu.depaul.edu – change this to the name of the printer so it’s easier for the user to tell.
• Use (Choose a Driver…): Pick the applicable driver for this printer. Clicking this will display a drop-down menu; choose “Select Software…”

  

6. From the dialogue box that appears, pick the appropriate driver. From the filter box in the top-right, begin typing the model of the printer to search for the appropriate driver. The model of the printer can usually be found on the front of the printer or near the printer's control panel. If the appropriate driver is unavailable, printer drivers may need to be downloaded and installed first – HP printer drivers are located here: https://support.apple.com/kb/dl1888?locale=en_US. After clicking OK as shown below, you will be brought back to the previous window.

7. Click Add on the lower-right corner of the window to add the printer, as shown below:

  

8. After the printer has been added, be sure to check Duplex Unit so that the printer can print double-sided. Click OK to finish.

9. The printer is now fully added. When the user is printing for the first time, the system will prompt for credentials. Follow the formatting below with the user’s own BlueKey credentials, and be sure to remember the information in keychain so that it does not prompt again in the future.